Over 8,000 Sold!
Cart 0
National HRO-50-1 Can Capacitor and Re-Cap Kit

HRO-50-1 Re-Cap Kit

$ 33.75
Choose One:
1.5" Mounting Clamp:

Our can-cap has a 1-1/2" outside diameter. As such it will not fit in the original 1-3/8" mounting clamp. There are various alternative ways of installing the can-cap. The cleanest is to replace the existing 1-3/8" clamp with a 1-1/2" unit. This requires removing the existing clamp mounting screws or rivets at the rear of the chassis. We supply the 1-1/2" clamp at our cost of $4.25. Center-to-center, the new clamp's screw holes are ~5/32" farther apart than those of the original clamp. However, they are also oblong. Most customers have indicated that their new clamp could be mounted "as-is". A few have stated that they needed to deform the holes slightly with a screwdriver.

Can-Type Electrolytic Capacitor
Original Specs: New Specs:
40 uF @ 475V 45 uF @ 500V
40 uF @ 475V 45 uF @ 500V

Twist-tab mounting. All sections rated at 105C degrees.
Capacitance and leakage tested. Cap tolerance plus or minus 20%

Discrete Electrolytic Capacitors
Original Specs: New Specs:
2 - 25 uF @ 50V 2 - 22 uF @ 50V

Discrete Poly Replacements
Original Specs: New Specs:
8 - .01 uF @ 600V 8 - .01 uF @ 630V
10 - .1 uF @ 400V ---
3 - .1 uF @ 600V 13 - .1 uF @ 630V
1 - .25 uF @ 200V ---
1 - .25 uF @ 600V 2 - .22 uF @ 630V
1 - .5 uF @ 100V 1 - .47 uF @ 630V

Share this Product